Easy release - accelerator separation system.
Innovative accelerator separation system for Finsterwalder Quick-Out and Paralock separating carabiners.
The system captivates with low height, weight neutrality in relation to a standard brummary hook connection and permanent, safe function.
The Easy release separation system can be easily attached to the carrier straps of the paraglider if the EASY release ring clip can be collected instead of the roasting hook. If this is not possible, the original accelerator line must be replaced with the accelerator line with ring clip of the easy release system.
Weight: 22 g/couple
Scope of delivery:
- 2x ring clip with accelerator leash for assembly on the carrier straps of the paraglider
- 2x triggering hooks with accelerated leash and triggered line (Static Line) for assembly on the accelerator ropes of the paragliders
- Assembly instructions
Additional security
A foot accelerator separation system is required to enable the main screen to be completely separated after an emergency screen opening. The release takes place automatically after the carabiners are opened.
- Modern rescue devices are designed to drift on the side and thereby create dynamic buoyancy. In the approval process, the sinking speed is determined without a main screen. An untrained main umbrella prevents the drift and thus increases the pulp.
- The possibility of controllable rescues to choose his landing site is an important safety plus. If the main umbrella is not separated in controllable rescue devices, this safety plus is dispensed with.
- Due to the interactions between paraglider and rescue device, there is a risk of increased commuting, or due to a scissor position, there is an increased descent speed.
- It has been shown that a separated main shield usually collapses very quickly and its rescue is easier. In addition, there is a much lower risk of damage to the paraglider if a tree landing does not take place with a full pilot weight.
Description
