Easy Release - Accelerator release system.
Innovative accelerator release system for Finsterwalder QUICK-OUT and PARALOCK release carabiners.
The system impresses with its low height, weight neutrality compared to a standard Brummel hook connection, and durable, reliable function.
The EASY RELEASE release system can be easily attached to the risers of the paraglider if the EASY RELEASE ring clip can be looped in instead of the Brummel hook. If this is not possible, the original accelerator line must be replaced with the accelerator line with ring clip from the EASY RELEASE system.
Weight: 22 g/pair
Scope of delivery:
- 2x ring clips with accelerator lines for attachment to the risers of the paraglider
- 2x release hooks with accelerator line and release line (static line) for mounting on the accelerator lines of the paraglider harness
- Installation instructions
Additional safety
A foot accelerator separation system is required to enable complete separation of the main canopy after a reserve parachute deployment. The release occurs automatically after the carabiners are opened.
- Modern rescue devices are designed to drift sideways, thereby generating dynamic lift. During the certification process, the sink rate is determined without the main canopy. A main canopy that has not been separated prevents drift, thereby increasing the sink rate.
- The ability to steer the rescue system and choose your landing site is a significant safety advantage. If the main canopy is not separated in steerable rescue systems, this safety advantage is lost.
- Interactions between the paraglider and the rescue device can increase the risk of pendulum motion or result in an increased sink rate due to a scissor position.
- It has been shown that a separated main canopy usually collapses very quickly and is easier to recover. In addition, there is a significantly lower risk of damage to the paraglider if a tree landing is not made with the full weight of the pilot.
Description
