The iXS Flow 2.0 protective vest combines additional back protection with sporty comfort. It is designed for active outdoor athletes who want to supplement their protective gear with a close-fitting protective vest.
Whether paragliding, mountain biking, skiing, snowboarding, or participating in other sports—the iXS Flow 2.0 offers a practical way to wear a safe back protector directly against the body.
The iXS Flow 2.0 protective vest features an exceptionally flat Hex-Cell back protector made of flexible thermopolymer. The honeycomb-shaped construction combines impact absorption with high ventilation and freedom of movement.
The sleeveless design and the form-fitting compression fabric made from recycled PET ensure a comfortable fit. The material is quick-drying, moisture-wicking, and has an antibacterial treatment.
The back protector is the central protective element of the iXS Flow 2.0 protective vest. It reduces the forces acting on the sensitive back area in the event of an impact.
A well-fitting protective vest helps prevent serious back injuries
The iXS Flow 2.0 is designed as a wearable protective solution for athletic activities. Its special construction allows the back protector to be integrated into your personal clothing and existing protective gear.
For effective protection, the vest should fit snugly without unnecessarily restricting freedom of movement.
For paragliders, an additional protective vest can be crucial—for example, during ground handling, a fall while taking off or landing, or during activities close to the ground.
The iXS Flow 2.0 provides additional back protection and is in no way a substitute for the harness’s built-in back protector.
Before using it in flight, check its compatibility with your harness and ensure you have full range of motion.
The iXS Flow 2.0 features an integrated Hex-Cell back protector designed to reduce impact forces on the protected back area. The protective effect is limited to the intended area of use.
Yes. The ventilated Hex-Cell construction and the moisture-wicking, quick-drying fabric ensure comfortable wear during athletic activities.
Using it as an additional layer of clothing is only advisable if the vest is compatible with the harness and does not interfere with its protection system. It is primarily designed for mountain biking, enduro, and trail riding and is not a substitute for a paragliding harness protector.
The vest should fit snugly against your body so that the back protector stays in the intended position. At the same time, there must be sufficient freedom of movement. Refer to the iXS size chart.
Yes. The Hex-Cell back protector is certified according to EN 1621-2:2014. This corresponds to Protection Level 2.
Protection Level 2 according to EN 1621-2 refers to the higher of the two protection classes for certified back protectors. It offers significantly better impact absorption than Level 1 in standardized impact tests.
During testing, the protector is subjected to an impact energy of 50 joules. The force transmitted through the protector to the body is measured.
| Criterion | Level 1 | Level 2 |
|---|---|---|
| Impact energy | 50 joules | 50 joules |
| Average residual force | Max. 18 kN | Max. 9 kN |
| Maximum single value | 24 kN | 12 kN |
| Protective effect | Basic protection | Higher impact absorption |
| Certification | EN 1621-2 | EN 1621-2 |
kN = kilonewton, a unit of force. Lower residual forces indicate better shock absorption in the test.
In the standardized test, Level 2 allows, on average, no more than half as much residual force as Level 1. However, this does not automatically mean a 50% lower risk of injury.
No. The vest is not a proven substitute for the protection system of a paragliding harness. In particular, its protective effect in typical paragliding landing scenarios is not equivalent to EN 1621-2 certification.
Free shipping in Switzerland and Liechtenstein on orders of CHF 150 or more
Swiss Store
Purchase on account
14-day return policy
Top-Notch Advice
Free shipping on orders of 150 CHF or more